Perfect fit
20mm spare
Hisense
Hisense HRTF206
Model HRTF206
fridge · 5★ GEMS
Will the Westinghouse WBE4302WC fit a 580mm cavity?
No
No — needs 1155mm more cavity width
Your 580mm cavity is compared with the 1725mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 1725mm |
|---|---|
| Height | 699mm |
| Depth | 723mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | -573mm before appliance alignment |
| Right side | 5mm | -573mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 580mm. Westinghouse WBE4302WC is 1725mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 1735mm. Result: 1155mm short.
3 alternatives that fit better in your 580mm cavity
Buy links
FAQ
- What size cavity does the Westinghouse WBE4302WC need?
- The Westinghouse WBE4302WC is 1725mm wide. With FitAppliance's practical side clearance buffer, it needs about 1735mm of cavity width.
- Will the Westinghouse WBE4302WC fit a 580mm cavity?
- No. A 580mm cavity is about 1155mm short of the practical width needed.
- Can I install this fridge in a 530mm cavity?
- A 530mm cavity would be checked against the same 1735mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Westinghouse WBE4302WC need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Westinghouse WBE4302WC in Australia?
- Retailer links are shown on this page where FitAppliance has product-page URLs available.