Tight fit
5mm spare
EURO
EURO EVD7WMWH
Model EVD7WMWH
dryer · 2★ GEMS
Check Availability
No verified retailer link yet.
Will the Bosch WTH85209AU Series 4 Heat Pump — 8kg fit a 540mm cavity?
No
No — needs 68mm more cavity width
Your 540mm cavity is compared with the 598mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 598mm |
|---|---|
| Height | 842mm |
| Depth | 578mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | -29mm before appliance alignment |
| Right side | 5mm | -29mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 540mm. Bosch WTH85209AU Series 4 Heat Pump — 8kg is 598mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 608mm. Result: 68mm short.
3 alternatives that fit better in your 540mm cavity
Buy links
No verified retailer product-page link is available for this model yet.
FAQ
- What size cavity does the Bosch WTH85209AU Series 4 Heat Pump — 8kg need?
- The Bosch WTH85209AU Series 4 Heat Pump — 8kg is 598mm wide. With FitAppliance's practical side clearance buffer, it needs about 608mm of cavity width.
- Will the Bosch WTH85209AU Series 4 Heat Pump — 8kg fit a 540mm cavity?
- No. A 540mm cavity is about 68mm short of the practical width needed.
- Can I install this dryer in a 490mm cavity?
- A 490mm cavity would be checked against the same 608mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Bosch WTH85209AU Series 4 Heat Pump — 8kg need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Bosch WTH85209AU Series 4 Heat Pump — 8kg in Australia?
- FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.