Will the Bosch WTH85209AU Series 4 Heat Pump — 8kg fit a 620mm cavity?

Tight

Tight — fits with 12mm spare width

Your 620mm cavity is compared with the 598mm product width plus 5mm side clearance on each side.

Product dimensions

Width598mm
Height842mm
Depth578mm

Clearance breakdown

AreaRequiredAvailable in this check
Left side5mm11mm before appliance alignment
Right side5mm11mm before appliance alignment
Top20mmCheck your cavity height separately
Rear10mmCheck your cavity depth separately

Cavity-fit math

Your cavity width is 620mm. Bosch WTH85209AU Series 4 Heat Pump — 8kg is 598mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 608mm. Result: 12mm spare.

3 alternatives that fit better in your 620mm cavity

EU
Tight fit 15mm spare
Eurotech
Eurotech ED-HPD8WH
Model ED-HPD8WH
W: 595mm + 10mm clearance / 620mm cavity (15mm spare)
H: 850mm product / cavity not entered
D: 630mm product / cavity not entered
dryer · 6★ GEMS
Check Availability

No verified retailer link yet.

VO
Tight fit 15mm spare
VOGUE
VOGUE 361301
Model 361301
W: 595mm + 10mm clearance / 620mm cavity (15mm spare)
H: 850mm product / cavity not entered
D: 630mm product / cavity not entered
dryer · 6★ GEMS
Check Availability

No verified retailer link yet.

VO
Tight fit 15mm spare
VOGUE
VOGUE 361302
Model 361302
W: 595mm + 10mm clearance / 620mm cavity (15mm spare)
H: 850mm product / cavity not entered
D: 630mm product / cavity not entered
dryer · 6★ GEMS
Check Availability

No verified retailer link yet.

Buy links

No verified retailer product-page link is available for this model yet.

FAQ

What size cavity does the Bosch WTH85209AU Series 4 Heat Pump — 8kg need?
The Bosch WTH85209AU Series 4 Heat Pump — 8kg is 598mm wide. With FitAppliance's practical side clearance buffer, it needs about 608mm of cavity width.
Will the Bosch WTH85209AU Series 4 Heat Pump — 8kg fit a 620mm cavity?
Yes. A 620mm cavity leaves about 12mm spare width after the practical clearance buffer.
Can I install this dryer in a 570mm cavity?
A 570mm cavity would be checked against the same 608mm practical width requirement. If it is below that figure, choose a narrower model.
Does the Bosch WTH85209AU Series 4 Heat Pump — 8kg need top clearance?
This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
Where can I buy the Bosch WTH85209AU Series 4 Heat Pump — 8kg in Australia?
FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.

Related fit checks