Perfect fit
20mm spare
Smeg
Smeg FAB10HRCR5AU
Model FAB10HRCR5AU
fridge · 5★ GEMS
Check Availability
No verified retailer link yet.
Will the Hisense HRTF206 fit a 580mm cavity?
Yes
Yes — fits with 20mm spare width
Your 580mm cavity is compared with the 550mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 550mm |
|---|---|
| Height | 1410mm |
| Depth | 490mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | 15mm before appliance alignment |
| Right side | 5mm | 15mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 580mm. Hisense HRTF206 is 550mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 560mm. Result: 20mm spare.
3 alternatives that fit better in your 580mm cavity
Buy links
FAQ
- What size cavity does the Hisense HRTF206 need?
- The Hisense HRTF206 is 550mm wide. With FitAppliance's practical side clearance buffer, it needs about 560mm of cavity width.
- Will the Hisense HRTF206 fit a 580mm cavity?
- Yes. A 580mm cavity leaves about 20mm spare width after the practical clearance buffer.
- Can I install this fridge in a 530mm cavity?
- A 530mm cavity would be checked against the same 560mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Hisense HRTF206 need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Hisense HRTF206 in Australia?
- Retailer links are shown on this page where FitAppliance has product-page URLs available.