Perfect fit
55mm spare
LG
LG GF-B505BB
Model GF-B505BB
fridge · 5★ GEMS
Will the Fisher & Paykel RF500QNUX1 fit a 900mm cavity?
Will the Fisher & Paykel RF500QNUX1 fit a 900mm cavity?
Yes. Fisher & Paykel RF500QNUX1 is 790mm wide and needs about 800mm after side-clearance buffer, so a 900mm cavity leaves 100mm spare width.
This is a width check only. Confirm height, depth, services, and the manufacturer installation manual before ordering.
Evidence used
- Fisher & Paykel RF500QNUX1 product dimensions W 790mm / H 1790mm / D 692mm
- fridge sizing guide Visible guide explaining cavity, clearance, and access checks
- Product dimensions and provenance on this page Visible table and source state used for this answer
Yes
Yes — fits with 100mm spare width
Your 900mm cavity is compared with the 790mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 790mm |
|---|---|
| Height | 1790mm |
| Depth | 692mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | 55mm before appliance alignment |
| Right side | 5mm | 55mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 900mm. Fisher & Paykel RF500QNUX1 is 790mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 800mm. Result: 100mm spare.
3 alternatives that fit better in your 900mm cavity
Perfect fit
55mm spare
LG
LG GF-LN500MBL
Model GF-LN500MBL
fridge · 5★ GEMS
Check Availability
Perfect fit
55mm spare
LG
LG GF-V500MBLC
Model GF-V500MBLC
fridge · 3★ GEMS
Check Availability
Buy links
FAQ
- What size cavity does the Fisher & Paykel RF500QNUX1 need?
- The Fisher & Paykel RF500QNUX1 is 790mm wide. With FitAppliance's practical side clearance buffer, it needs about 800mm of cavity width.
- Will the Fisher & Paykel RF500QNUX1 fit a 900mm cavity?
- Yes. A 900mm cavity leaves about 100mm spare width after the practical clearance buffer.
- Can I install this fridge in a 850mm cavity?
- A 850mm cavity would be checked against the same 800mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Fisher & Paykel RF500QNUX1 need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Fisher & Paykel RF500QNUX1 in Australia?
- Retailer links are shown on this page where FitAppliance has product-page URLs available.