Will the Fisher & Paykel DW60UT4I2 fit a 540mm cavity?
No
No — needs 67mm more cavity width
Your 540mm cavity is compared with the 597mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 597mm |
|---|---|
| Height | 857mm |
| Depth | 554mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | -29mm before appliance alignment |
| Right side | 5mm | -29mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 540mm. Fisher & Paykel DW60UT4I2 is 597mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 607mm. Result: 67mm short.
3 alternatives that fit better in your 540mm cavity
No better-fit alternative is available in the current catalog for this cavity width.
Buy links
FAQ
- What size cavity does the Fisher & Paykel DW60UT4I2 need?
- The Fisher & Paykel DW60UT4I2 is 597mm wide. With FitAppliance's practical side clearance buffer, it needs about 607mm of cavity width.
- Will the Fisher & Paykel DW60UT4I2 fit a 540mm cavity?
- No. A 540mm cavity is about 67mm short of the practical width needed.
- Can I install this dishwasher in a 490mm cavity?
- A 490mm cavity would be checked against the same 607mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Fisher & Paykel DW60UT4I2 need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Fisher & Paykel DW60UT4I2 in Australia?
- Retailer links are shown on this page where FitAppliance has product-page URLs available.