Perfect fit
30mm spare
Fisher & Paykel
Fisher & Paykel Washing Machine
Model WH1060P4
washing machine · 5★ GEMS
Will the Electrolux Washing Machine fit a 640mm cavity?
Will the Electrolux Washing Machine fit a 640mm cavity?
Yes. Electrolux Washing Machine is 600mm wide and needs about 610mm after side-clearance buffer, so a 640mm cavity leaves 30mm spare width.
This is a width check only. Confirm height, depth, services, and the manufacturer installation manual before ordering.
Evidence used
- Electrolux Washing Machine product dimensions W 600mm / H 850mm / D 659mm
- washing machine sizing guide Visible guide explaining cavity, clearance, and access checks
- Product dimensions and provenance on this page Visible table and source state used for this answer
Yes
Yes — fits with 30mm spare width
Your 640mm cavity is compared with the 600mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 600mm |
|---|---|
| Height | 850mm |
| Depth | 659mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | 20mm before appliance alignment |
| Right side | 5mm | 20mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 640mm. Electrolux Washing Machine is 600mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 610mm. Result: 30mm spare.
3 alternatives that fit better in your 640mm cavity
Perfect fit
30mm spare
Westinghouse
Westinghouse Washing Machine
Model WWF9024M5SA
washing machine · 4★ GEMS
Check Availability
Perfect fit
30mm spare
Westinghouse
Westinghouse Washing Machine
Model WWF1044M7SA
washing machine · 5★ GEMS
Check Availability
Buy links
FAQ
- What size cavity does the Electrolux Washing Machine need?
- The Electrolux Washing Machine is 600mm wide. With FitAppliance's practical side clearance buffer, it needs about 610mm of cavity width.
- Will the Electrolux Washing Machine fit a 640mm cavity?
- Yes. A 640mm cavity leaves about 30mm spare width after the practical clearance buffer.
- Can I install this washing machine in a 590mm cavity?
- A 590mm cavity would be checked against the same 610mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Electrolux Washing Machine need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Electrolux Washing Machine in Australia?
- Retailer links are shown on this page where FitAppliance has product-page URLs available.