Tight fit
13mm spare
Fisher & Paykel
Fisher & Paykel DW60UT4I2
Model DW60UT4I2
dishwasher · 5★ GEMS
Will the Fisher & Paykel DW60UZT4B2 fit a 620mm cavity?
Will the Fisher & Paykel DW60UZT4B2 fit a 620mm cavity?
Yes. Fisher & Paykel DW60UZT4B2 is 597mm wide and needs about 607mm after side-clearance buffer, so a 620mm cavity leaves 13mm spare width.
This is a width check only. Confirm height, depth, services, and the manufacturer installation manual before ordering.
Evidence used
- Fisher & Paykel DW60UZT4B2 product dimensions W 597mm / H 857mm / D 574mm
- dishwasher sizing guide Visible guide explaining cavity, clearance, and access checks
- Product dimensions and provenance on this page Visible table and source state used for this answer
Tight
Tight — fits with 13mm spare width
Your 620mm cavity is compared with the 597mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 597mm |
|---|---|
| Height | 857mm |
| Depth | 574mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | 11mm before appliance alignment |
| Right side | 5mm | 11mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 620mm. Fisher & Paykel DW60UZT4B2 is 597mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 607mm. Result: 13mm spare.
3 alternatives that fit better in your 620mm cavity
Tight fit
13mm spare
Haier
Haier HDW15F1B1
Model HDW15F1B1
dishwasher · 4★ GEMS
Check Availability
Tight fit
13mm spare
Haier
Haier HDW15F3S1
Model HDW15F3S1
dishwasher · 5★ GEMS
Check Availability
Buy links
FAQ
- What size cavity does the Fisher & Paykel DW60UZT4B2 need?
- The Fisher & Paykel DW60UZT4B2 is 597mm wide. With FitAppliance's practical side clearance buffer, it needs about 607mm of cavity width.
- Will the Fisher & Paykel DW60UZT4B2 fit a 620mm cavity?
- Yes. A 620mm cavity leaves about 13mm spare width after the practical clearance buffer.
- Can I install this dishwasher in a 570mm cavity?
- A 570mm cavity would be checked against the same 607mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Fisher & Paykel DW60UZT4B2 need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Fisher & Paykel DW60UZT4B2 in Australia?
- Retailer links are shown on this page where FitAppliance has product-page URLs available.