Will the Fisher & Paykel RF500QNUX1 fit a 700mm cavity?

No

No — needs 100mm more cavity width

Your 700mm cavity is compared with the 790mm product width plus 5mm side clearance on each side.

Product dimensions

Width790mm
Height1790mm
Depth688mm

Clearance breakdown

AreaRequiredAvailable in this check
Left side5mm-45mm before appliance alignment
Right side5mm-45mm before appliance alignment
Top20mmCheck your cavity height separately
Rear10mmCheck your cavity depth separately

Cavity-fit math

Your cavity width is 700mm. Fisher & Paykel RF500QNUX1 is 790mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 800mm. Result: 100mm short.

3 alternatives that fit better in your 700mm cavity

RY
Perfect fit 20mm spare
RYOBI
RYOBI R18FRF10
Model R18FRF10
W: 670mm + 10mm clearance / 700mm cavity (20mm spare)
H: 350mm product / cavity not entered
D: 440mm product / cavity not entered
fridge · 3★ GEMS
Check Availability

No verified retailer link yet.

EL
Tight fit 10mm spare
Electrolux
Electrolux EHE5267B Bottom Mount 520L
Model EHE5267B Bottom Mount 520L
W: 680mm + 10mm clearance / 700mm cavity (10mm spare)
H: 1700mm product / cavity not entered
D: 685mm product / cavity not entered
fridge · 4★ GEMS
Check Availability

No verified retailer link yet.

WE
Tight fit 10mm spare
Westinghouse
Westinghouse WBE5314SA Bottom Mount 528L
Model WBE5314SA Bottom Mount 528L
W: 680mm + 10mm clearance / 700mm cavity (10mm spare)
H: 1690mm product / cavity not entered
D: 680mm product / cavity not entered
fridge · 3★ GEMS
Check Availability

No verified retailer link yet.

Buy links

FAQ

What size cavity does the Fisher & Paykel RF500QNUX1 need?
The Fisher & Paykel RF500QNUX1 is 790mm wide. With FitAppliance's practical side clearance buffer, it needs about 800mm of cavity width.
Will the Fisher & Paykel RF500QNUX1 fit a 700mm cavity?
No. A 700mm cavity is about 100mm short of the practical width needed.
Can I install this fridge in a 650mm cavity?
A 650mm cavity would be checked against the same 800mm practical width requirement. If it is below that figure, choose a narrower model.
Does the Fisher & Paykel RF500QNUX1 need top clearance?
This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
Where can I buy the Fisher & Paykel RF500QNUX1 in Australia?
Retailer links are shown on this page where FitAppliance has product-page URLs available.

Related fit checks