Tight fit
16mm spare
Trade Tested
Trade Tested 916404
Model 916404
fridge · 4★ GEMS
Check Availability
No verified retailer link yet.
Will the Fisher & Paykel RF500QNUX1 fit a 600mm cavity?
No
No — needs 200mm more cavity width
Your 600mm cavity is compared with the 790mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 790mm |
|---|---|
| Height | 1790mm |
| Depth | 688mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | -95mm before appliance alignment |
| Right side | 5mm | -95mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 600mm. Fisher & Paykel RF500QNUX1 is 790mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 800mm. Result: 200mm short.
3 alternatives that fit better in your 600mm cavity
Buy links
FAQ
- What size cavity does the Fisher & Paykel RF500QNUX1 need?
- The Fisher & Paykel RF500QNUX1 is 790mm wide. With FitAppliance's practical side clearance buffer, it needs about 800mm of cavity width.
- Will the Fisher & Paykel RF500QNUX1 fit a 600mm cavity?
- No. A 600mm cavity is about 200mm short of the practical width needed.
- Can I install this fridge in a 550mm cavity?
- A 550mm cavity would be checked against the same 800mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Fisher & Paykel RF500QNUX1 need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Fisher & Paykel RF500QNUX1 in Australia?
- Retailer links are shown on this page where FitAppliance has product-page URLs available.