Will the Fisher & Paykel DW60UT4I2 fit a 580mm cavity?

No

No — needs 30mm more cavity width

Your 580mm cavity is compared with the 600mm product width plus 5mm side clearance on each side.

Product dimensions

Width600mm
Height857mm
Depth580mm

Clearance breakdown

AreaRequiredAvailable in this check
Left side5mm-10mm before appliance alignment
Right side5mm-10mm before appliance alignment
Top20mmCheck your cavity height separately
Rear10mmCheck your cavity depth separately

Cavity-fit math

Your cavity width is 580mm. Fisher & Paykel DW60UT4I2 is 600mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 610mm. Result: 30mm short.

3 alternatives that fit better in your 580mm cavity

OM
Perfect fit 20mm spare
Omega
Omega Dishwasher
Model OFI101X
W: 550mm + 10mm clearance / 580mm cavity (20mm spare)
H: 452mm product / cavity not entered
D: 518mm product / cavity not entered
dishwasher · 3★ GEMS
Check Availability

No verified retailer link yet.

AR
Perfect fit 20mm spare
Artusi
Artusi Dishwasher
Model ADW5608B
W: 550mm + 10mm clearance / 580mm cavity (20mm spare)
H: 590mm product / cavity not entered
D: 500mm product / cavity not entered
dishwasher · 3★ GEMS
Check Availability

No verified retailer link yet.

AR
Perfect fit 20mm spare
Artusi
Artusi Dishwasher
Model ADW8TTX
W: 550mm + 10mm clearance / 580mm cavity (20mm spare)
H: 590mm product / cavity not entered
D: 500mm product / cavity not entered
dishwasher · 3★ GEMS
Check Availability

No verified retailer link yet.

Buy links

FAQ

What size cavity does the Fisher & Paykel DW60UT4I2 need?
The Fisher & Paykel DW60UT4I2 is 600mm wide. With FitAppliance's practical side clearance buffer, it needs about 610mm of cavity width.
Will the Fisher & Paykel DW60UT4I2 fit a 580mm cavity?
No. A 580mm cavity is about 30mm short of the practical width needed.
Can I install this dishwasher in a 530mm cavity?
A 530mm cavity would be checked against the same 610mm practical width requirement. If it is below that figure, choose a narrower model.
Does the Fisher & Paykel DW60UT4I2 need top clearance?
This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
Where can I buy the Fisher & Paykel DW60UT4I2 in Australia?
Retailer links are shown on this page where FitAppliance has product-page URLs available.

Related fit checks