Perfect fit
20mm spare
Midea
Midea MDRC284FZE01APE
Model MDRC284FZE01APE
fridge · 6★ GEMS
Check Availability
No verified retailer link yet.
Will the Westinghouse WSE6200SB fit a 800mm cavity?
No
No — needs 121mm more cavity width
Your 800mm cavity is compared with the 911mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 911mm |
|---|---|
| Height | 1780mm |
| Depth | 746mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | -56mm before appliance alignment |
| Right side | 5mm | -56mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 800mm. Westinghouse WSE6200SB is 911mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 921mm. Result: 121mm short.
3 alternatives that fit better in your 800mm cavity
Buy links
No verified retailer product-page link is available for this model yet.
FAQ
- What size cavity does the Westinghouse WSE6200SB need?
- The Westinghouse WSE6200SB is 911mm wide. With FitAppliance's practical side clearance buffer, it needs about 921mm of cavity width.
- Will the Westinghouse WSE6200SB fit a 800mm cavity?
- No. A 800mm cavity is about 121mm short of the practical width needed.
- Can I install this fridge in a 750mm cavity?
- A 750mm cavity would be checked against the same 921mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Westinghouse WSE6200SB need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Westinghouse WSE6200SB in Australia?
- FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.