Perfect fit
24mm spare
Galanz
Galanz BC-127-53H
Model BC-127-53H
fridge · 5★ GEMS
Check Availability
No verified retailer link yet.
Will the Westinghouse WFM0900WD fit a 540mm cavity?
No
No — needs 25mm more cavity width
Your 540mm cavity is compared with the 555mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 555mm |
|---|---|
| Height | 850mm |
| Depth | 575mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | -8mm before appliance alignment |
| Right side | 5mm | -8mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 540mm. Westinghouse WFM0900WD is 555mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 565mm. Result: 25mm short.
3 alternatives that fit better in your 540mm cavity
Buy links
No verified retailer product-page link is available for this model yet.
FAQ
- What size cavity does the Westinghouse WFM0900WD need?
- The Westinghouse WFM0900WD is 555mm wide. With FitAppliance's practical side clearance buffer, it needs about 565mm of cavity width.
- Will the Westinghouse WFM0900WD fit a 540mm cavity?
- No. A 540mm cavity is about 25mm short of the practical width needed.
- Can I install this fridge in a 490mm cavity?
- A 490mm cavity would be checked against the same 565mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Westinghouse WFM0900WD need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Westinghouse WFM0900WD in Australia?
- FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.