Perfect fit
20mm spare
Midea
Midea MDRC284FZE01APE
Model MDRC284FZE01APE
fridge · 6★ GEMS
Check Availability
No verified retailer link yet.
Will the Panasonic NR-XC541CUHA fit a 800mm cavity?
No
No — needs 63mm more cavity width
Your 800mm cavity is compared with the 853mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 853mm |
|---|---|
| Height | 1775mm |
| Depth | 686mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | -27mm before appliance alignment |
| Right side | 5mm | -27mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 800mm. Panasonic NR-XC541CUHA is 853mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 863mm. Result: 63mm short.
3 alternatives that fit better in your 800mm cavity
Buy links
No verified retailer product-page link is available for this model yet.
FAQ
- What size cavity does the Panasonic NR-XC541CUHA need?
- The Panasonic NR-XC541CUHA is 853mm wide. With FitAppliance's practical side clearance buffer, it needs about 863mm of cavity width.
- Will the Panasonic NR-XC541CUHA fit a 800mm cavity?
- No. A 800mm cavity is about 63mm short of the practical width needed.
- Can I install this fridge in a 750mm cavity?
- A 750mm cavity would be checked against the same 863mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Panasonic NR-XC541CUHA need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Panasonic NR-XC541CUHA in Australia?
- FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.