Will the Panasonic NR-BX421H fit a 700mm cavity?

Binding

Very tight — only 4mm spare width

Your 700mm cavity is compared with the 686mm product width plus 5mm side clearance on each side.

Product dimensions

Width686mm
Height1680mm
Depth695mm

Clearance breakdown

AreaRequiredAvailable in this check
Left side5mm7mm before appliance alignment
Right side5mm7mm before appliance alignment
Top20mmCheck your cavity height separately
Rear10mmCheck your cavity depth separately

Cavity-fit math

Your cavity width is 700mm. Panasonic NR-BX421H is 686mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 696mm. Result: 4mm spare.

3 alternatives that fit better in your 700mm cavity

RY
Perfect fit 20mm spare
RYOBI
RYOBI R18FRF10
Model R18FRF10
W: 670mm + 10mm clearance / 700mm cavity (20mm spare)
H: 350mm product / cavity not entered
D: 440mm product / cavity not entered
fridge · 3★ GEMS
Check Availability

No verified retailer link yet.

EL
Tight fit 10mm spare
Electrolux
Electrolux EHE5267B Bottom Mount 520L
Model EHE5267B Bottom Mount 520L
W: 680mm + 10mm clearance / 700mm cavity (10mm spare)
H: 1700mm product / cavity not entered
D: 685mm product / cavity not entered
fridge · 4★ GEMS
Check Availability

No verified retailer link yet.

WE
Tight fit 10mm spare
Westinghouse
Westinghouse WBE5314SA Bottom Mount 528L
Model WBE5314SA Bottom Mount 528L
W: 680mm + 10mm clearance / 700mm cavity (10mm spare)
H: 1690mm product / cavity not entered
D: 680mm product / cavity not entered
fridge · 3★ GEMS
Check Availability

No verified retailer link yet.

Buy links

No verified retailer product-page link is available for this model yet.

FAQ

What size cavity does the Panasonic NR-BX421H need?
The Panasonic NR-BX421H is 686mm wide. With FitAppliance's practical side clearance buffer, it needs about 696mm of cavity width.
Will the Panasonic NR-BX421H fit a 700mm cavity?
Yes. A 700mm cavity leaves about 4mm spare width after the practical clearance buffer.
Can I install this fridge in a 650mm cavity?
A 650mm cavity would be checked against the same 696mm practical width requirement. If it is below that figure, choose a narrower model.
Does the Panasonic NR-BX421H need top clearance?
This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
Where can I buy the Panasonic NR-BX421H in Australia?
FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.

Related fit checks