Perfect fit
20mm spare
Omega
Omega Dishwasher
Model OFI101X
dishwasher · 3★ GEMS
Check Availability
No verified retailer link yet.
Will the Hisense Dishwasher fit a 580mm cavity?
No
No — needs 29mm more cavity width
Your 580mm cavity is compared with the 599mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 599mm |
|---|---|
| Height | 885mm |
| Depth | 597mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | -10mm before appliance alignment |
| Right side | 5mm | -10mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 580mm. Hisense Dishwasher is 599mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 609mm. Result: 29mm short.
3 alternatives that fit better in your 580mm cavity
Buy links
No verified retailer product-page link is available for this model yet.
FAQ
- What size cavity does the Hisense Dishwasher need?
- The Hisense Dishwasher is 599mm wide. With FitAppliance's practical side clearance buffer, it needs about 609mm of cavity width.
- Will the Hisense Dishwasher fit a 580mm cavity?
- No. A 580mm cavity is about 29mm short of the practical width needed.
- Can I install this dishwasher in a 530mm cavity?
- A 530mm cavity would be checked against the same 609mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Hisense Dishwasher need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Hisense Dishwasher in Australia?
- FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.