Perfect fit
20mm spare
MIELE
MIELE K 2601 Vi
Model K 2601 Vi
fridge · 5★ GEMS
Check Availability
No verified retailer link yet.
Will the Hisense HRCF146 fit a 640mm cavity?
Tight
Tight — fits with 5mm spare width
Your 640mm cavity is compared with the 625mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 625mm |
|---|---|
| Height | 854mm |
| Depth | 559mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | 7mm before appliance alignment |
| Right side | 5mm | 7mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 640mm. Hisense HRCF146 is 625mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 635mm. Result: 5mm spare.
3 alternatives that fit better in your 640mm cavity
Buy links
No verified retailer product-page link is available for this model yet.
FAQ
- What size cavity does the Hisense HRCF146 need?
- The Hisense HRCF146 is 625mm wide. With FitAppliance's practical side clearance buffer, it needs about 635mm of cavity width.
- Will the Hisense HRCF146 fit a 640mm cavity?
- Yes. A 640mm cavity leaves about 5mm spare width after the practical clearance buffer.
- Can I install this fridge in a 590mm cavity?
- A 590mm cavity would be checked against the same 635mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Hisense HRCF146 need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Hisense HRCF146 in Australia?
- FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.