Perfect fit
20mm spare
MIELE
MIELE K 2601 Vi
Model K 2601 Vi
fridge · 5★ GEMS
Check Availability
No verified retailer link yet.
Will the Haier HRF420BHS fit a 640mm cavity?
No
No — needs 70mm more cavity width
Your 640mm cavity is compared with the 700mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 700mm |
|---|---|
| Height | 1725mm |
| Depth | 675mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | -30mm before appliance alignment |
| Right side | 5mm | -30mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 640mm. Haier HRF420BHS is 700mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 710mm. Result: 70mm short.
3 alternatives that fit better in your 640mm cavity
Buy links
FAQ
- What size cavity does the Haier HRF420BHS need?
- The Haier HRF420BHS is 700mm wide. With FitAppliance's practical side clearance buffer, it needs about 710mm of cavity width.
- Will the Haier HRF420BHS fit a 640mm cavity?
- No. A 640mm cavity is about 70mm short of the practical width needed.
- Can I install this fridge in a 590mm cavity?
- A 590mm cavity would be checked against the same 710mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Haier HRF420BHS need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Haier HRF420BHS in Australia?
- Retailer links are shown on this page where FitAppliance has product-page URLs available.