Will the Haier HDW15F3S1 fit a 700mm cavity?

Yes

Yes — fits with 92mm spare width

Your 700mm cavity is compared with the 598mm product width plus 5mm side clearance on each side.

Product dimensions

Width598mm
Height850mm
Depth610mm

Clearance breakdown

AreaRequiredAvailable in this check
Left side5mm51mm before appliance alignment
Right side5mm51mm before appliance alignment
Top20mmCheck your cavity height separately
Rear10mmCheck your cavity depth separately

Cavity-fit math

Your cavity width is 700mm. Haier HDW15F3S1 is 598mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 608mm. Result: 92mm spare.

3 alternatives that fit better in your 700mm cavity

AR
Perfect fit 46mm spare
Artusi
Artusi Dishwasher
Model ADW7003B
W: 644mm + 10mm clearance / 700mm cavity (46mm spare)
H: 881mm product / cavity not entered
D: 661mm product / cavity not entered
dishwasher · 4★ GEMS
Check Availability

No verified retailer link yet.

BL
Perfect fit 46mm spare
BLANCO
BLANCO BSID3458X
Model BSID3458X
W: 644mm + 10mm clearance / 700mm cavity (46mm spare)
H: 851mm product / cavity not entered
D: 661mm product / cavity not entered
dishwasher · 4★ GEMS
Check Availability

No verified retailer link yet.

MA
Perfect fit 46mm spare
majestic
majestic MAJESTICRETRODW-RED
Model MAJESTICRETRODW-RED
W: 644mm + 10mm clearance / 700mm cavity (46mm spare)
H: 881mm product / cavity not entered
D: 661mm product / cavity not entered
dishwasher · 4★ GEMS
Check Availability

No verified retailer link yet.

Buy links

FAQ

What size cavity does the Haier HDW15F3S1 need?
The Haier HDW15F3S1 is 598mm wide. With FitAppliance's practical side clearance buffer, it needs about 608mm of cavity width.
Will the Haier HDW15F3S1 fit a 700mm cavity?
Yes. A 700mm cavity leaves about 92mm spare width after the practical clearance buffer.
Can I install this dishwasher in a 650mm cavity?
A 650mm cavity would be checked against the same 608mm practical width requirement. If it is below that figure, choose a narrower model.
Does the Haier HDW15F3S1 need top clearance?
This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
Where can I buy the Haier HDW15F3S1 in Australia?
Retailer links are shown on this page where FitAppliance has product-page URLs available.

Related fit checks