Will the Haier HCF97W fit a 620mm cavity?

Yes

Yes — fits with 65mm spare width

Your 620mm cavity is compared with the 545mm product width plus 5mm side clearance on each side.

Product dimensions

Width545mm
Height845mm
Depth490mm

Clearance breakdown

AreaRequiredAvailable in this check
Left side5mm37mm before appliance alignment
Right side5mm37mm before appliance alignment
Top20mmCheck your cavity height separately
Rear10mmCheck your cavity depth separately

Cavity-fit math

Your cavity width is 620mm. Haier HCF97W is 545mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 555mm. Result: 65mm spare.

3 alternatives that fit better in your 620mm cavity

YO
Perfect fit 20mm spare
yokohama
yokohama YOKF325W
Model YOKF325W
W: 590mm + 10mm clearance / 620mm cavity (20mm spare)
H: 1725mm product / cavity not entered
D: 645mm product / cavity not entered
fridge · 4★ GEMS
Check Availability

No verified retailer link yet.

FP
Tight fit 18mm spare
Fisher & Paykel
Fisher & Paykel RS6009SBL1
Model RS6009SBL1
W: 592mm + 10mm clearance / 620mm cavity (18mm spare)
H: 897mm product / cavity not entered
D: 579mm product / cavity not entered
fridge · 6★ GEMS
Check Availability

No verified retailer link yet.

FP
Tight fit 18mm spare
Fisher & Paykel
Fisher & Paykel RS6009SBLT1
Model RS6009SBLT1
W: 592mm + 10mm clearance / 620mm cavity (18mm spare)
H: 897mm product / cavity not entered
D: 579mm product / cavity not entered
fridge · 5★ GEMS
Check Availability

No verified retailer link yet.

Buy links

No verified retailer product-page link is available for this model yet.

FAQ

What size cavity does the Haier HCF97W need?
The Haier HCF97W is 545mm wide. With FitAppliance's practical side clearance buffer, it needs about 555mm of cavity width.
Will the Haier HCF97W fit a 620mm cavity?
Yes. A 620mm cavity leaves about 65mm spare width after the practical clearance buffer.
Can I install this fridge in a 570mm cavity?
A 570mm cavity would be checked against the same 555mm practical width requirement. If it is below that figure, choose a narrower model.
Does the Haier HCF97W need top clearance?
This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
Where can I buy the Haier HCF97W in Australia?
FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.

Related fit checks