Will the Fisher & Paykel Washing Machine fit a 540mm cavity?

No

No — needs 125mm more cavity width

Your 540mm cavity is compared with the 655mm product width plus 5mm side clearance on each side.

Product dimensions

Width655mm
Height850mm
Depth600mm

Clearance breakdown

AreaRequiredAvailable in this check
Left side5mm-58mm before appliance alignment
Right side5mm-58mm before appliance alignment
Top20mmCheck your cavity height separately
Rear10mmCheck your cavity depth separately

Cavity-fit math

Your cavity width is 540mm. Fisher & Paykel Washing Machine is 655mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 665mm. Result: 125mm short.

3 alternatives that fit better in your 540mm cavity

CA
Perfect fit 20mm spare
CAMEC
CAMEC Washing Machine
Model CFLWM-40
W: 510mm + 10mm clearance / 540mm cavity (20mm spare)
H: 700mm product / cavity not entered
D: 490mm product / cavity not entered
washing machine · 4★ GEMS
Check Availability

No verified retailer link yet.

LC
Tight fit 15mm spare
Living & Co
Living & Co MAE55-1106TPS/01FM-AU
Model MAE55-1106TPS/01FM-AU
W: 515mm + 10mm clearance / 540mm cavity (15mm spare)
H: 910mm product / cavity not entered
D: 525mm product / cavity not entered
washing machine · 3★ GEMS
Check Availability

No verified retailer link yet.

PA
Tight fit 15mm spare
PARMCO
PARMCO Washing Machine
Model WM55WT
W: 515mm + 10mm clearance / 540mm cavity (15mm spare)
H: 910mm product / cavity not entered
D: 525mm product / cavity not entered
washing machine · 3★ GEMS
Check Availability

No verified retailer link yet.

Buy links

FAQ

What size cavity does the Fisher & Paykel Washing Machine need?
The Fisher & Paykel Washing Machine is 655mm wide. With FitAppliance's practical side clearance buffer, it needs about 665mm of cavity width.
Will the Fisher & Paykel Washing Machine fit a 540mm cavity?
No. A 540mm cavity is about 125mm short of the practical width needed.
Can I install this washing machine in a 490mm cavity?
A 490mm cavity would be checked against the same 665mm practical width requirement. If it is below that figure, choose a narrower model.
Does the Fisher & Paykel Washing Machine need top clearance?
This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
Where can I buy the Fisher & Paykel Washing Machine in Australia?
Retailer links are shown on this page where FitAppliance has product-page URLs available.

Related fit checks