Will the Fisher & Paykel RS7621SLHE1 fit a 620mm cavity?

No

No — needs 146mm more cavity width

Your 620mm cavity is compared with the 756mm product width plus 5mm side clearance on each side.

Product dimensions

Width756mm
Height2134mm
Depth610mm

Clearance breakdown

AreaRequiredAvailable in this check
Left side5mm-68mm before appliance alignment
Right side5mm-68mm before appliance alignment
Top20mmCheck your cavity height separately
Rear10mmCheck your cavity depth separately

Cavity-fit math

Your cavity width is 620mm. Fisher & Paykel RS7621SLHE1 is 756mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 766mm. Result: 146mm short.

3 alternatives that fit better in your 620mm cavity

YO
Perfect fit 20mm spare
yokohama
yokohama YOKF325W
Model YOKF325W
W: 590mm + 10mm clearance / 620mm cavity (20mm spare)
H: 1725mm product / cavity not entered
D: 645mm product / cavity not entered
fridge · 4★ GEMS
Check Availability

No verified retailer link yet.

FP
Tight fit 18mm spare
Fisher & Paykel
Fisher & Paykel RS6009SBL1
Model RS6009SBL1
W: 592mm + 10mm clearance / 620mm cavity (18mm spare)
H: 897mm product / cavity not entered
D: 579mm product / cavity not entered
fridge · 6★ GEMS
Check Availability

No verified retailer link yet.

FP
Tight fit 18mm spare
Fisher & Paykel
Fisher & Paykel RS6009SBLT1
Model RS6009SBLT1
W: 592mm + 10mm clearance / 620mm cavity (18mm spare)
H: 897mm product / cavity not entered
D: 579mm product / cavity not entered
fridge · 5★ GEMS
Check Availability

No verified retailer link yet.

Buy links

No verified retailer product-page link is available for this model yet.

FAQ

What size cavity does the Fisher & Paykel RS7621SLHE1 need?
The Fisher & Paykel RS7621SLHE1 is 756mm wide. With FitAppliance's practical side clearance buffer, it needs about 766mm of cavity width.
Will the Fisher & Paykel RS7621SLHE1 fit a 620mm cavity?
No. A 620mm cavity is about 146mm short of the practical width needed.
Can I install this fridge in a 570mm cavity?
A 570mm cavity would be checked against the same 766mm practical width requirement. If it is below that figure, choose a narrower model.
Does the Fisher & Paykel RS7621SLHE1 need top clearance?
This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
Where can I buy the Fisher & Paykel RS7621SLHE1 in Australia?
FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.

Related fit checks