Tight fit
15mm spare
Eurotech
Eurotech ED-HPD8WH
Model ED-HPD8WH
dryer · 6★ GEMS
Check Availability
No verified retailer link yet.
Will the Fisher & Paykel DH8060P1 fit a 620mm cavity?
Tight
Tight — fits with 10mm spare width
Your 620mm cavity is compared with the 600mm product width plus 5mm side clearance on each side.
Product dimensions
| Width | 600mm |
|---|---|
| Height | 850mm |
| Depth | 650mm |
Clearance breakdown
| Area | Required | Available in this check |
|---|---|---|
| Left side | 5mm | 10mm before appliance alignment |
| Right side | 5mm | 10mm before appliance alignment |
| Top | 20mm | Check your cavity height separately |
| Rear | 10mm | Check your cavity depth separately |
Cavity-fit math
Your cavity width is 620mm. Fisher & Paykel DH8060P1 is 600mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 610mm. Result: 10mm spare.
3 alternatives that fit better in your 620mm cavity
Buy links
FAQ
- What size cavity does the Fisher & Paykel DH8060P1 need?
- The Fisher & Paykel DH8060P1 is 600mm wide. With FitAppliance's practical side clearance buffer, it needs about 610mm of cavity width.
- Will the Fisher & Paykel DH8060P1 fit a 620mm cavity?
- Yes. A 620mm cavity leaves about 10mm spare width after the practical clearance buffer.
- Can I install this dryer in a 570mm cavity?
- A 570mm cavity would be checked against the same 610mm practical width requirement. If it is below that figure, choose a narrower model.
- Does the Fisher & Paykel DH8060P1 need top clearance?
- This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
- Where can I buy the Fisher & Paykel DH8060P1 in Australia?
- Retailer links are shown on this page where FitAppliance has product-page URLs available.