Will the Electrolux Washing Machine fit a 640mm cavity?

Yes

Yes — fits with 30mm spare width

Your 640mm cavity is compared with the 600mm product width plus 5mm side clearance on each side.

Product dimensions

Width600mm
Height850mm
Depth659mm

Clearance breakdown

AreaRequiredAvailable in this check
Left side5mm20mm before appliance alignment
Right side5mm20mm before appliance alignment
Top20mmCheck your cavity height separately
Rear10mmCheck your cavity depth separately

Cavity-fit math

Your cavity width is 640mm. Electrolux Washing Machine is 600mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 610mm. Result: 30mm spare.

3 alternatives that fit better in your 640mm cavity

NC
Perfect fit 25mm spare
NCE
NCE Washing Machine
Model NCEG30-700
W: 605mm + 10mm clearance / 640mm cavity (25mm spare)
H: 690mm product / cavity not entered
D: 470mm product / cavity not entered
washing machine · 2★ GEMS
Check Availability

No verified retailer link yet.

NC
Perfect fit 25mm spare
NCE
NCE Washing Machine
Model NCEG30-700H
W: 605mm + 10mm clearance / 640mm cavity (25mm spare)
H: 690mm product / cavity not entered
D: 470mm product / cavity not entered
washing machine · 2★ GEMS
Check Availability

No verified retailer link yet.

MI
Perfect fit 29mm spare
Midea
Midea Washing Machine
Model MT512W100RDW
W: 601mm + 10mm clearance / 640mm cavity (29mm spare)
H: 1050mm product / cavity not entered
D: 620mm product / cavity not entered
washing machine · 5★ GEMS
Check Availability

No verified retailer link yet.

Buy links

No verified retailer product-page link is available for this model yet.

FAQ

What size cavity does the Electrolux Washing Machine need?
The Electrolux Washing Machine is 600mm wide. With FitAppliance's practical side clearance buffer, it needs about 610mm of cavity width.
Will the Electrolux Washing Machine fit a 640mm cavity?
Yes. A 640mm cavity leaves about 30mm spare width after the practical clearance buffer.
Can I install this washing machine in a 590mm cavity?
A 590mm cavity would be checked against the same 610mm practical width requirement. If it is below that figure, choose a narrower model.
Does the Electrolux Washing Machine need top clearance?
This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
Where can I buy the Electrolux Washing Machine in Australia?
FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.

Related fit checks