Will the Bosch WAX32EH0AU Series 8 — 10kg fit a 540mm cavity?

No

No — needs 68mm more cavity width

Your 540mm cavity is compared with the 598mm product width plus 5mm side clearance on each side.

Product dimensions

Width598mm
Height848mm
Depth590mm

Clearance breakdown

AreaRequiredAvailable in this check
Left side5mm-29mm before appliance alignment
Right side5mm-29mm before appliance alignment
Top20mmCheck your cavity height separately
Rear10mmCheck your cavity depth separately

Cavity-fit math

Your cavity width is 540mm. Bosch WAX32EH0AU Series 8 — 10kg is 598mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 608mm. Result: 68mm short.

3 alternatives that fit better in your 540mm cavity

CA
Perfect fit 20mm spare
CAMEC
CAMEC Washing Machine
Model CFLWM-40
W: 510mm + 10mm clearance / 540mm cavity (20mm spare)
H: 700mm product / cavity not entered
D: 490mm product / cavity not entered
washing machine · 4★ GEMS
Check Availability

No verified retailer link yet.

LC
Tight fit 15mm spare
Living & Co
Living & Co MAE55-1106TPS/01FM-AU
Model MAE55-1106TPS/01FM-AU
W: 515mm + 10mm clearance / 540mm cavity (15mm spare)
H: 910mm product / cavity not entered
D: 525mm product / cavity not entered
washing machine · 3★ GEMS
Check Availability

No verified retailer link yet.

PA
Tight fit 15mm spare
PARMCO
PARMCO Washing Machine
Model WM55WT
W: 515mm + 10mm clearance / 540mm cavity (15mm spare)
H: 910mm product / cavity not entered
D: 525mm product / cavity not entered
washing machine · 3★ GEMS
Check Availability

No verified retailer link yet.

Buy links

No verified retailer product-page link is available for this model yet.

FAQ

What size cavity does the Bosch WAX32EH0AU Series 8 — 10kg need?
The Bosch WAX32EH0AU Series 8 — 10kg is 598mm wide. With FitAppliance's practical side clearance buffer, it needs about 608mm of cavity width.
Will the Bosch WAX32EH0AU Series 8 — 10kg fit a 540mm cavity?
No. A 540mm cavity is about 68mm short of the practical width needed.
Can I install this washing machine in a 490mm cavity?
A 490mm cavity would be checked against the same 608mm practical width requirement. If it is below that figure, choose a narrower model.
Does the Bosch WAX32EH0AU Series 8 — 10kg need top clearance?
This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
Where can I buy the Bosch WAX32EH0AU Series 8 — 10kg in Australia?
FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.

Related fit checks