Will the Bosch KGN396LBAS Top Mount 368L fit a 900mm cavity?

Yes

Yes — fits with 290mm spare width

Your 900mm cavity is compared with the 600mm product width plus 5mm side clearance on each side.

Product dimensions

Width600mm
Height1860mm
Depth664mm

Clearance breakdown

AreaRequiredAvailable in this check
Left side5mm150mm before appliance alignment
Right side5mm150mm before appliance alignment
Top20mmCheck your cavity height separately
Rear10mmCheck your cavity depth separately

Cavity-fit math

Your cavity width is 900mm. Bosch KGN396LBAS Top Mount 368L is 600mm wide. FitAppliance adds 5mm side clearance × 2, so the practical width needed is 610mm. Result: 290mm spare.

3 alternatives that fit better in your 900mm cavity

HA
Tight fit 15mm spare
Haier
Haier HRF520BHS French Door 520L
Model HRF520BHS French Door 520L
W: 875mm + 10mm clearance / 900mm cavity (15mm spare)
H: 1730mm product / cavity not entered
D: 695mm product / cavity not entered
fridge · 3★ GEMS
Check Availability
HI
Tight fit 10mm spare
Hitachi
Hitachi R-ZX740RA
Model R-ZX740RA
W: 880mm + 10mm clearance / 900mm cavity (10mm spare)
H: 1833mm product / cavity not entered
D: 738mm product / cavity not entered
fridge · 4★ GEMS
Check Availability

No verified retailer link yet.

FP
Perfect fit 35mm spare
Fisher & Paykel
Fisher & Paykel RB90S64MKIW1 2
Model RB90S64MKIW1 2
W: 855mm + 10mm clearance / 900mm cavity (35mm spare)
H: 640mm product / cavity not entered
D: 557mm product / cavity not entered
fridge · 4★ GEMS
Check Availability

No verified retailer link yet.

Buy links

No verified retailer product-page link is available for this model yet.

FAQ

What size cavity does the Bosch KGN396LBAS Top Mount 368L need?
The Bosch KGN396LBAS Top Mount 368L is 600mm wide. With FitAppliance's practical side clearance buffer, it needs about 610mm of cavity width.
Will the Bosch KGN396LBAS Top Mount 368L fit a 900mm cavity?
Yes. A 900mm cavity leaves about 290mm spare width after the practical clearance buffer.
Can I install this fridge in a 850mm cavity?
A 850mm cavity would be checked against the same 610mm practical width requirement. If it is below that figure, choose a narrower model.
Does the Bosch KGN396LBAS Top Mount 368L need top clearance?
This page uses the practical FitAppliance buffer of 20mm top clearance. Always check the manufacturer installation manual before purchase.
Where can I buy the Bosch KGN396LBAS Top Mount 368L in Australia?
FitAppliance does not yet have a verified retailer link for this model, so use the dimensions here as a fit check before searching retailers.

Related fit checks