Fridges that fit a 1020mm cavity (Australia 2026)
1171 fridge models currently fit this cavity width after per-brand side clearance.
Use this page as a quick shortlist, then run your exact height/depth check on the main calculator.
Top brands that fit 1020mm
Featured models
How to measure this fridge cavity
Use these three views before you shortlist appliances: width, height, and depth all need to pass with ventilation clearance.
1. Prepare a tape measure and notepad
Use a rigid tape measure and record each dimension in millimetres. Measure from fixed cabinet edges, not from trim pieces.
2. Measure cavity width
Measure the internal cavity width at the front and the back, then use the smaller value. This prevents side-wall taper from being missed.
3. Measure cavity height
Measure from finished floor level to the underside of overhead cabinetry at both left and right sides, then keep the smaller value.
4. Measure cavity depth
Measure from the back wall to the cabinet front edge. Include any skirting, power point cover, or plumbing protrusion in the usable depth.
5. Apply ventilation clearance before purchase
Compare your cavity measurements against appliance dimensions plus manufacturer clearances for side, rear, and top ventilation.
Target cavity for this page: W 1020 × H 1800 × D 700 mm.