Haier Fridge dimensions and clearance requirements
Haier fridge installs usually get tight at the top panel and rear wall. This page brings the working clearance numbers together and points you to the 52 models we track for this range. Current guide figures are 25.4mm at each side, 25.4mm at the rear and 25.4mm above. The side gap is 14.600000000000001mm tighter than the usual category baseline. The rear allowance is 0.3999999999999986mm deeper than the default figure. The top allowance is 24.6mm tighter than the default figure.
Side clearance
25.4mm
25.4mm
Rear clearance
25.4mm
25.4mm
Top clearance
25.4mm
25.4mm
Models in database
52
52
Door swing data
✓ All 52 confirmed
✓ All 52 confirmed
Installation Tips
- Check the wall, benchtop and overhead cabinet as separate measurements before delivery day.
- Leave enough room to level the cabinet after it is in position, not just enough room to slide it in.
- Keep the installation manual beside the tape measure so the airflow note is checked against the real cavity.
Current Haier Models
HRF520BHS French Door 520L
W 875mm × H 1730mm × D 695mm
HRF420BHS
W 700mm × H 1725mm × D 675mm
HRF420BS
W 700mm × H 1725mm × D 675mm
Previous / Archived Models
Older reference models are kept for replacement searches and historical size lookups. Use the active models above when you want a current retailer link.
HRF450TG
W 700mm × H 1775mm × D 695mm
HRF523XHG Series
W 908mm × H 1775mm × D 647mm
HRF575XC
W 905mm × H 1775mm × D 707mm