Smeg Fridge dimensions and clearance requirements
Smeg fridge installs usually get tight at the top panel and rear wall. This page brings the working clearance numbers together and points you to the 48 models we track for this range. Current guide figures are 20mm at each side, 50mm at the rear and 50mm above. The side gap is 20mm tighter than the usual category baseline. The rear allowance is 25mm deeper than the default figure.
Side clearance
20mm
20mm
Rear clearance
50mm
50mm
Top clearance
50mm
50mm
Models in database
48
48
Door swing confirmed
2 of 48 Research in progress
2 of 48 Research in progress
Installation Tips
- Check the wall, benchtop and overhead cabinet as separate measurements before delivery day.
- Leave enough room to level the cabinet after it is in position, not just enough room to slide it in.
- Keep the installation manual beside the tape measure so the airflow note is checked against the real cavity.
Current Smeg Models
FAB32RWH5AU
W 601mm × H 1980mm × D 768mm
SABI221FF
W 540mm × H 1770mm × D 545mm
FAB28RDBLM5
W 601mm × H 1500mm × D 728mm
Previous / Archived Models
Older reference models are kept for replacement searches and historical size lookups. Use the active models above when you want a current retailer link.
FAB38RCRAU
W 706mm × H 2050mm × D 771mm
FA490RAN5AU
W 704mm × H 1955mm × D 704mm
FA490RANAU
W 704mm × H 1955mm × D 749mm