Smeg Dishwashers Clearance Requirements
Smeg dishwashers installed in Australian homes require 20mm side, 50mm rear, and 50mm top ventilation clearance per manufacturer guidelines. Notable: wider side spacing than the 2mm category average (20mm required); generous top clearance of 50mm (default is 25mm) — cabinetry above must be 50mm or higher from the appliance top. Insufficient clearance can void warranty and cause premature compressor failure.
Side clearance
20mm
20mm
Rear clearance
50mm
50mm
Top clearance
50mm
50mm
Models in database
14
14
Door swing data
✓ All 14 confirmed
✓ All 14 confirmed
Installation Tips
- Push dishwasher at least 50mm from the wall before securing — use a tape measure, not eyeballing.
- If installing under overhead cabinetry, confirm 50mm gap above the lid or top panel.
- Measure your cavity before purchase — dishwasher dimensions vary by ±20mm between models within this brand.